Home :: Purchase Parts By Chassis :: Margay Ignite K3 :: Throttle and Brake Components

Throttle and Brake Components



  •  per page
Brake pedal, Brava, tubular
SKU: 097242

Fabricated from 1/2" diameter 4130 Chromoly steel, our tubular brake pedal features a tig-welded three position tab that allows you to fine tune braking feel. Mount bushing is sized for 5/16" hardware and can be drilled to accept the 3/8" hardware that was utilized on earlier model Brava karts. Mounting hardware is not included.

Our price: $64.06
Brake Rod, 1/4-28
SKU: 09720X1
These brake / throttle rods are equipped with 1/4"-28 thread on each end.

Our price: $11.95

Clevis 1/4-28
SKU: 097101
Clevis 1/4-28 for use with throttle / brake connector rods.

Our price: $6.95
Clevis pin 1/4 X 3/4
SKU: 097102
Clevis pin 1/4 X 3/4. For use with the 1/4 clevis.

Our price: $1.99
MCP Brake Caliper Shims
SKU: 71354

Brake caliper shims can help you dial in how quickly your brake pads grab the brake rotor. These shims come in two different sizes, a 1/32" and a 1/16" allowing for easy changes with precise comfort.

Our price: $2.95

MCP Caliper Bleed Screw
SKU: 71358

These MCP Caliper Bleed Screw are the fast, easy alternative to getting your brakes bled. These screws work with the MCP Billet, Cast, and MiniLite braking systems.

Our price: $2.52
MCP Cast Caliper Assembly
SKU: 7135

This cast brake caliper from Martin Custom Products is used on most 4 cycle applications in modern Margay karts. This caliper assembly comes with everything you need to stop on a dime in no time.

Our price: $189.00
MCP Cast Caliper Brake Pads
SKU: 71360

These metallic brake pads are designed to be used with the MCP Cast Caliper system. They are easy to install and should help shed some tenths under braking.

Our price: $40.71
MCP Cast Caliper Rebuild Kit
SKU: 71359

This caliper rebuild kit is designed to rebuild the MCP Cast brake caliper system. It comes with two pistons, and 2 piston o-rings, and should help restore some stopping power in your old caliper.

Our price: $23.99
MCP Cast Master Cylinder Cap
SKU: 7129

This master cylinder filler cap is designed to be used with the MCP Cast master cylinder.

Our price: $2.00
MCP Cast Master Rebuild Kit
SKU: 71309

This master cylinder rebuild kit comes with everything you need to rebuild your MCP Cast master cylinder from the ground up. This kit should help increase the performance of your worn out master cylinder.

Our price: $22.00
MCP Cast Pad Adjuster Assembly
SKU: 7187

This 5/16 x 18 brake pad adjuster assembly is designed to be used with the MCP Cast caliper system. It allows you to help dial in the throw of you brake pedal by allowing the pads to grab quicker or slower than their current setting.

Our price: $11.95
MCP Complete Cast Brake System
SKU: 7131

This complete braking system features the MCP Cast brake caliper and master cylinder. Looking to upgrade your stopping power or replace older parts? This kit gives you everything you need to do it.


Brake Kit Ships Pre-Bled 

Our price: $439.00
MCP Standard Master Cylinder
SKU: 7130

This MCP standard master cylinder assembly is all you need to replace your existing MCP master cylinder. This master cylinder is designed to be used with the MCP standard brake caliper. Piston Diameter: .875"

  • #71301 features two brass fittings for use with 3/16” plastic line
  • #7130 features a single outlet with a -3 AN fitting for use with a single braided line (as used on current Ignite karts)
  • #71311 features dual -3 AN fittings for use with dual braided lines (as used pre-2018 Ignite karts)

The MCP standard system uses DOT 5 (Silicon) fluid which can be found here.

Our price: $179.95

Pedal cap plug
SKU: 097341

Pedal plug intended for use with the Brava line pedals.

Our price: $0.56
  •  per page