Home :: Vintage Margay Parts

Vintage Margay Parts



  •  per page
10, 12 & 15 Degree Spindles
SKU: 4565

These spindles are available in 10, 12, and 15 degrees for both the right and left hand sides. They have a 5/8" shaft.

Our price: $69.95

24 Series wheel bolt kit
SKU: 24-23-BK
Bolt kit for 24 series wheel assemblies

Our price: $5.95
5/16 - 24 U-Bolt with Clamp Plate
SKU: 23-51K

5/16-24 U-Ring w/ Clamp Plate

Holes drilled for locking fasteners. 

1 7/16 Inch gap from end to end of holes 

Our price: $6.25
5/8" Front Hubs (US Mount)
SKU: 093082

Front wheel hubs for the vintage style 5/8" spindles for US bolt pattern wheels. These hubs come with the mounting hardware to bolt the wheel to the hub.

Our price: $30.44
5/8" Solid Steering Shafts
SKU: 094104

The 5/8" diameter solid steering shafts were typically used on all Margay karts built before 1994. They feature 2 position steering ackerman adjust-ability.

Our price: $59.95

5/8" Spindle Shaft Mounting Hardware
SKU: 094594

These mounting hardware pieces are made to be used with the 5/8" vintage style spindle shafts. A complete kit consists of a castle nut, washer, one big wheel spacer, one medium wheel spacer, and two small wheel spacers. These wheel spacers are machined from billet aluminum.

Our price: $1.72

5/8" Steering Bushing
SKU: 094240

These 5/8" Steering bushings are designed to be used with any size of the 5/8" tubular steering shafts. They are a rigid black plastic and are very lightweight.

Our price: $4.02
5/8" Steering Hub
SKU: 094182

This steering shaft is designed to be used with the 5/8" solid steering shafts on the older vintage style Margay chassis.

Our price: $9.39
Quantity Out of stock
62 Series Wheel Hub
SKU: 62-2-1251

These wheel hubs were designed to be used with the 62 series wheels, and a 1 1/4" axle. These hubs are sold individually.

Our price: $32.96

Axle nuts for 1" stepped axle (Pair)
SKU: 24-23-20

We found another stash of axle nuts! This could be the last of them. Don't waste any time!

NOS 3/4-16 castle nuts for Margay series 150 axles that were standard equipment in all Margay karts produced from the late 1960's through 1980. 

Sold in pairs.

Our price: $5.96
Bandito Nerf Bar
SKU: 24-345

NOS nerf bar for all Bandito karts.

Our price: $36.00
Base Plate Clamp
SKU: 421-18
NOS, original engine mount clamp used on all Margay karts from the mid-1970ís through the early 1990ís.
For use on all karts with ĎAmericaní (narrow) engine mount spacing. Zinc plated

Our price: $4.95
Flame Decal, CIK Box Pod
SKU: 6452
1997 Flame Decal For CIK Box Pod Side Pods

Our price: $24.95

Floor Mount Fuel Tank-Panther X, Pro-X, Expert, Puma, Lynx
SKU: 52160
Original OEM fuel tank for a wide range of Margay and many other brands from the 70's, 80's and early 90's.

Our price: $55.00
Floor Pan Wing
SKU: 095112

These floor pan wings are made for the older style floor pans, and are great for keeping air flow travel underneath the chassis. Just pop rivet them to the floor pan, and you are ready to go!

Our price: $10.30
  •  per page