Home :: Purchase Parts By Chassis :: Margay Ignite K3 :: Steering Components

Steering Components

 

Products

 
  •  per page
Spindle Washer (Thick)
SKU: 042300

These thin spindle washers are used twice on each spindle. They are placed in between the kingpin bolt/castle nut and the caster/camber pill on the outside of the spindle yolk.


Our price: $0.19
Quantity
Spindle Washer (Thin)
SKU: 042301

These thin spindle washers are designed to be used in between the spindle bearing and spindle spacer on both the top and bottom of the spindle.


Our price: $0.22
Quantity
5/16-24 nut
SKU: 033200

Jam nut for tie rod ends


Our price: $0.37

Voltz Cilp
SKU: 091110

Voltz clips are used for various applications around the kart. Bigger clips are usually used on the end of the spindles, and smaller clips are usually used on the kingpin ends.


Our price: $1.20

Spindle Ride Height Spacers
SKU: 094540

These spindle spacers are used to adjust the ride height of the spindle. These shims are 1/8" thick and are designed to be used with a 3/8" kingpin bolt. Most modern day applications require four spacers per side.


Our price: $1.56
Quantity
Kingpin Castle Nut (3/8")
SKU: 043340

This kingpin castle nut is designed to be used with the 3/8" diameter kingpin bolts found in most modern day applications.


Our price: $4.19
Quantity
17mm Spindle Spacers
SKU: 094605

These anodized spindle spacers are designed to be used with 17mm spindle shafts. They come in a 5mm, 10mm and 20mm lengths. Most modern applications use three of each per spindle. Most modern applications require 2 long spacers, 1 medium spacer and 2 short spacers.


Our price: $4.79

Kingpin Bearing (3/8")
SKU: 093038

This kingpin bearing has a 3/8" diameter and is designed to work with all modern day spindles, along with the older style 10, 12, and 15 degree vintage spindles.


Our price: $5.85
Quantity
AC Standard Pill (3/8" Kingpin)
SKU: 094590

Adjustable caster / camber pill that allows the spindle to sit at its factory settings. These pills are centered, and can only be used with a 3/8" kingpin bolt.


Our price: $7.99
Quantity
3/4" Steering Bushing
SKU: 094242

These 3/4" Steering bushings are designed to be used with any size of the 3/4" tubular steering shafts. They are a rigid black plastic and are very lightweight.


Our price: $8.76
Quantity
Billet Spindle Castle Nut
SKU: 063475

This billet aluminum spindle castle nut is designed to be used with our billet 17mm and 25mm spindles. They are sold individually.


Our price: $8.96
Quantity
Brava Kingpin Bolts (3/8")
SKU: 041314

These kingpin bolts are designed to be used in most modern day Margay racing chassis. They are sold individually.


Our price: $9.55

Tie Rod End-Male
SKU: 094170

5/16-24 rod ends for use with Margay tubular tie rods


Our price: $9.93

AC Full Offset Pill (3/8" Kingpin)
SKU: 094591

Adjustable Caster pill, 3/8 kingpin, full offset-Utilize to change caster and camber on all AC compatible spindle hangers that feature a 3/4" mounting hole. Installing a single pill allows you to change caster or camber by up to 1.5 degrees. Installing a full offset pill in the top and bottom of the sppindle hanger allows you to change caster by up to 3 degrees.


Our price: $12.38
Quantity
AC Half Offset Pill (3/8" Kingpin)
SKU: 094589

Adjustable Caster pill, 3/8 kingpin, half offset-Utilize to change caster and camber on all AC compatible spindle hangers that feature a 3/4" mounting hole. Installing a single pill allows you to change caster or camber by up to .75 degrees. Installing a half offset pill in the top and bottom of the sppindle hanger allows you to change caster by up to 1.5 degrees.


Our price: $12.38
Quantity
  •  per page