- per page
Having some vibrations problems with your floor pan? These rubber floor pan grommets will help provide a level of separation between your floor pan tabs and you floor pan, allowing for a quiet and smooth ride.
This lead weight mounting bracket allows you to mount up to eight pounds on the lower steering supports of all post-2014 Margay full size Brava & Ignite karts.
Front wheel hubs for the vintage style 5/8" spindles for US bolt pattern wheels. These hubs come with the mounting hardware to bolt the wheel to the hub.
These torsion bar clamps are made for karts with 1 1/8" or 28mm tubing. They provide a tight lock on your front torsion tubes, and a great look for the entire kart. They use 8mm hardware.
This torsion blade is made for the new style Margay racing chassis and provide a great level of grip options to the front end of the kart. It can be set in a soft or hard position to help dial in the front end handling of the kart. They are manufactured from billet aluminium.
This torsion bar fits all post-2000 Brava karts and all Ignite K3 karts.
This front torsion tube is made and cut for the use in a Margay Brava 1.2 or 4.2 chassis. Using 6 3/4" hardware, this tube can help provide a stiff front end leading to increase front end grip levels.
This 12" long rear torsion tube is made to be used in the Brava 1.2 and later models. It will help increase the rear grip levels by providing a stiffer rear end.
Made for direct use with the Margay Brava 1.25 chassis, this rear torsion tube will help provide a strong level of grip to the rear end of the kart.
Need some rear end grip, but don't want to go over the top? Then this rear torsion blade is for you. Inserted into a Brava 1.25 chassis, this torsion blade can be adjusted to a soft or hard setting to help give the precise grip levels that you are needing.
This 9 1/4" front torsion tube is made to increase chassis stiffness in the Brava Rookie models. When inserted, the front end becomes more rigid allowing for increase front end grip levels.
This 1 1/4" TruSpeed sprocket hub is super light-weight and has a slick flat black finish. It is designed to be used only with a 1 1/4" axle and a 6 bolt gear.
This brake hub designed to be used with a 6 bolt brake rotor on an 1 3/4" axle. It is in a brilliant purple anodized finish and is manufacture from billet aluminum.
This 1 3/8 axle measures a full 40" in length. It is designed to be used with the 1 3/8" bearing cassettes and 1 3/8" bearings.
This 30mm brake hub is super light weight, and provides a slick red or black look. It is designed to be used with the MCP 6.0" 3-bolt brake rotor.
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
