- per page
This MCP braided line set is designed to be used with most modern Margay chassis models (excluding cadet/widlcat applications). It requires the use of NPT fittings both on the master cylinder and the caliper. It measures approximately 27" in length.
Fabricated from 1/2" diameter 4130 Chromoly steel, our tubular throttle pedal is tig-welded and is finished with nickel plating. Mount bushing is sized for 5/16" hardware and can be drilled to accept the 3/8" hardware that was utilized on earlier model Brava karts. Mounting hardware is not included.
These torsion bar clamps are made for karts with 1 1/8" or 28mm tubing. They provide a tight lock on your front torsion tubes, and a great look for the entire kart. They use 8mm hardware.
This 1 3/8 axle measures a full 40" in length. It is designed to be used with the 1 3/8" bearing cassettes and 1 3/8" bearings.
The 5/8" diameter solid steering shafts were typically used on all Margay karts built before 1994. They feature 2 position steering ackerman adjust-ability.
These 5/8" Steering bushings are designed to be used with any size of the 5/8" tubular steering shafts. They are a rigid black plastic and are very lightweight.
This steering shaft is designed to be used with the 5/8" solid steering shafts on the older vintage style Margay chassis.
Adjustable Caster pill, 3/8 kingpin, full offset-Utilize to change caster and camber on all AC compatible spindle hangers that feature a 3/4" mounting hole. Installing a single pill allows you to change caster or camber by up to 1.5 degrees. Installing a full offset pill in the top and bottom of the sppindle hanger allows you to change caster by up to 3 degrees.
Fabricated from 1/2" diameter 4130 Chromoly steel, our tubular brake pedal features a tig-welded three position tab that allows you to fine tune braking feel. Mount bushing is sized for 5/16" hardware and can be drilled to accept the 3/8" hardware that was utilized on earlier model Brava karts. Mounting hardware is not included.
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
