- per page
AC dowel pin, 3/16" x 1/2" for locating adjustable caster/camber pills. Standard equipment on all A/C karts built prior to 1994.
Adjustable Caster pill, 3/8 kingpin, full offset-Utilize to change caster and camber on all AC compatible spindle hangers that feature a 3/4" mounting hole. Installing a single pill allows you to change caster or camber by up to 1.5 degrees. Installing a full offset pill in the top and bottom of the sppindle hanger allows you to change caster by up to 3 degrees.
Adjustable caster / camber pill that allows the spindle to sit at its factory settings. These pills are centered, and can only be used with a 3/8" kingpin bolt.
Adjustable Caster pill, 3/8 kingpin, half offset-Utilize to change caster and camber on all AC compatible spindle hangers that feature a 3/4" mounting hole. Installing a single pill allows you to change caster or camber by up to .75 degrees. Installing a half offset pill in the top and bottom of the sppindle hanger allows you to change caster by up to 1.5 degrees.
Adjustable caster / camber pill that allows the spindle to sit at its factory settings. These pills are centered, and can only be used with a 8mm kingpin bolt.
Margay Racing's new billet aluminium steering block fairing mount combines cutting edge technology with lightweight performance. This steering block is available for American manufactures (3/4") and European manufactures (20mm).
These 20mm steering bushings are designed to be used with the 20mm kid kart style steering shafts. They are a rigid silver plastic and are very lightweight, and feature two mounting positions for extra adjust-ability.
These 3/4" Steering bushings are designed to be used with any size of the 3/4" tubular steering shafts. They are a rigid black plastic and are very lightweight.
These 5/8" Steering bushings are designed to be used with any size of the 5/8" tubular steering shafts. They are a rigid black plastic and are very lightweight.
This KG Bodyworks steering wheel has a 9 1/2" diameter and is wrapped completely in suede. It has a black anodized center aluminum piece holding it all together. This wheel is designed to be used with cadet / rookie karts.
This piece is to be used with the KG Bodyworks Daytona 330 series steering wheel, and is designed to be able to mount a Mychron or KG gauge.
Machined from billet 6061-T6 aluminum, this TruSpeed steering wheel hub fits a 3/4" diameter shaft (standard on all Margay Brava karts). Two mounting positions allow the driver to fine tune the steering wheel postion for maximum performance. The angled hub kicks the top of the wheel 8 degrees closer to the driver. Some drivers prefer a more vertically oriented wheel, claiming that it reduces fatigue and arm pump. Steering wheel mounting holes are tapped for M6x1 fasteners.
Machined from billet 6061-T6 aluminum, this TruSpeed steering wheel hub fits a 3/4" diameter shaft (standard on all Margay Brava karts). Two mounting positions allow the driver to fine tune the steering wheel postion for maximum performance. Steering wheel mounting holes are tapped for M6x1 fasteners.
These 20mm steering hubs are designed to be used with the 20mm kid kart steering shaft. Made from billet aluminium, these black anodized steering hubs have two mounting positions for optimum comfort.
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
