- per page
This is the spec air filter used in the Briggs LO206 engine rule set - Briggs #555729 'Green' air filter. Hose clamp is included.
This is a two bottled catch can assembly made for any chassis using an LO206 motor. Just easily bolt on to the outside of the right rear bearing hanger assembly, connect the hoses and go!
Float bowl kit for the Briggs & Stratton LO206 engine.
Carb slide (throttle valve) for the Briggs LO206 engine.
Briggs & Stratton fuel pump for the LO206 engine
Throttle slide cap assembly for a Briggs & Stratton LO206 Motor
Help keep your engine free of dirt and dust with this pre filter from Outerwear. This cover is to be used with the LO206 'Green' air filter, Briggs #555729. Check your local rules for legality.
The LO206 engine requires air to pressurize the fuel pump. This is achieved by running a line from the crank case to the top of the fuel pump (marked 'P'). This crank case fitting replaces the yellow oil fill plug on the top of the engine and allows the pump to get it's needed pressure.
This vent tube kit plugs directly into the hole in the valve cover and is designed to route the excess oil flow from the head, into an acceptable catch can system.
Throttle return spring for the Briggs & Stratton LO206 carburator slide assembly.
Idle mix kit for the Briggs & Stratton LO206 engine.
Rubber float bowl gasket for the Briggs LO206 Engine.
- per page