- per page
This vent tube kit plugs directly into the hole in the valve cover and is designed to route the excess oil flow from the head, into an acceptable catch can system.
Throttle return spring for the Briggs & Stratton LO206 carburator slide assembly.
This RLV 4104 silencer is the spec silencer used on all Briggs LO206 engine packages. Keep the noise muffled and the engine legal.
Help keep your engine free of dirt and dust with this pre filter from Outerwear. This cover is to be used with the LO206 'Green' air filter, Briggs #555729. Check your local rules for legality.
Protects your sprocket from scraping the ground, or anything else. Keep those sprocket teeth intact!
Throttle slide cap assembly for a Briggs & Stratton LO206 Motor
Briggs & Stratton sensor ignition magneto for the LO206 engine.
Idle mix kit for the Briggs & Stratton LO206 engine.
This kit comes with all the bolts required to fasten your header to top of the cylinder head. Kit includes: 2 - M6 x 1 header bolts, 2 locking washers, two standard washers and safety wire to tie it all together.
This header is the spec header called out in the Briggs Racing LO206 rules package - the RLV 5507. Free from welded on brackets for 2015, this header comes with an upper and lower mounting kit and hose clamps needed to fix directly to the engine.
Briggs & Stratton fuel pump for the LO206 engine
Float bowl kit for the Briggs & Stratton LO206 engine.
Rubber float bowl gasket for the Briggs LO206 Engine.
- per page