- per page
Keep your components in place and spinning when they are supposed to with these axle keys for the 40mm and 50mm Righetti Axles.
These bearing cassettes can only be used with the 2011 Brava 1.11 and 1.11ck or later models with either a 40mm or 50mm bearing. They utilize a 6-bolt mounting system to provide an extra level of adjust-ability to the chassis.
Our stock, 40mm x 1040mm with a 3mm wall thickness axles are offered in soft and medium, and a 4mm wall stiff variation to allow you to fine tune your karts handling to different track conditions
NEW FOR 2016: All 40mm axles will use a 3-peg axle key for sprocket, brake and wheel hubs. Purchase 3-peg axle key HERE
These 40mm axle bearing provide a tight fit and a smooth roll with as little tension as possible. They come with the two set screws to help keep the axle from spinning.
Split piece aluminum locking collars - made to hold your axle, wheel hubs, sprocket and brake hubs in place!
This 40mm wheel hub is manufactured from billet aluminum and is layed out in a 3.58 'Euro' mount pattern. It features a pilot lip on the end of the hub that is removable if you need to go narrower on the axle. 65mm in length.
40mm WK billet aluminum brake hub for all 40mm axle applications. Brilliant red anodized finish.
40mm WK billet aluminum sprocket hub for all 40mm axle applications. Brilliant red anodized finish.
Bearing cassette mount bolts are a M8 x 1.25, hex head bolt. No conical or flat washers are needed. Comes in a bright yellow zinc finish.
M8 x 1.25 wheel hub stud for 30mm, 40mm and 50mm wheel hubs
- per page
Bridgestone Tires-Sales & Closeouts
Accessories
Frame Components
OTK VLR100 Engines
