- per page
Bearing cassette mount bolts are a M10 x 1.5, pan head bolt. No conical or flat washers are needed. Comes in a bright blue zinc finish.
M8 x 1.25 wheel hub stud for 30mm, 40mm and 50mm wheel hubs
Keep your components in place and spinning when they are supposed to with these axle keys for the 40mm and 50mm Righetti Axles.
Split piece aluminum locking collars - made to hold your axle, wheel hubs, sprocket and brake hubs in place!
These 40mm axle bearing provide a tight fit and a smooth roll with as little tension as possible. They come with the two set screws to help keep the axle from spinning.
These split bearing cassettes are for the use of 40mm or 50mm axle bearings in the older 3 bolt cassette mounting chassis. They are split at the top to provide adjustable tension on the bearing itself.
This lightweight brake hub is designed to be used with a 40mm rear axle and a 4 bolt brake rotor. It comes in a brilliant polished finish.
This 40mm wheel hub is manufactured from billet aluminum and is layed out in a 3.58 'Euro' mount pattern. It features a pilot lip on the end of the hub that is removable if you need to go narrower on the axle. 65mm in length.
This 40mm billet aluminum sprocket hub is ultra-lightweight, made in the USA and includes long hardware for use with sprocket guards. Black anodized finish.
Our stock, 40mm x 1040mm with a 3mm wall thickness axles are offered in soft and medium, and a 4mm wall stiff variation to allow you to fine tune your karts handling to different track conditions
NEW FOR 2016: All 40mm axles will use a 3-peg axle key for sprocket, brake and wheel hubs. Purchase 3-peg axle key HERE
- per page