- per page
Throttle slide cap assembly for a Briggs & Stratton LO206 Motor
Briggs & Stratton sensor ignition magneto for the LO206 engine.
Idle mix kit for the Briggs & Stratton LO206 engine.
Briggs & Stratton fuel pump for the LO206 engine
Float bowl kit for the Briggs & Stratton LO206 engine.
Rubber float bowl gasket for the Briggs LO206 Engine.
Carb slide (throttle valve) for the Briggs LO206 engine.
This clutch bolt kit is for use on the Briggs LO206 engine package and comes with: 5/16" bolt, 5/16" locking washer and a flat washer.
The Hillard flame clutch is among the most durable and precise shoe style clutches on the market. A bullet proof design combined with several different tuning options makes this clutch a winner. Easy installation and changing make for fast adjustments when you need it the most.
This vent tube kit plugs directly into the hole in the valve cover and is designed to route the excess oil flow from the head, into an acceptable catch can system.
The LO206 engine requires air to pressurize the fuel pump. This is achieved by running a line from the crank case to the top of the fuel pump (marked 'P'). This crank case fitting replaces the yellow oil fill plug on the top of the engine and allows the pump to get it's needed pressure.
Help keep your engine free of dirt and dust with this pre filter from Outerwear. This cover is to be used with the LO206 'Green' air filter, Briggs #555729. Check your local rules for legality.
This is the spec air filter used in the Briggs LO206 engine rule set - Briggs #555729 'Green' air filter. Hose clamp is included.
- per page
