- per page
Our stock, 50mm x 1040mm with a 2mm wall thickness axles are offered in soft, medium, and stiff variations to allow you to fine tune your karts handling to different track conditions.
These bearing cassettes can only be used with the 2011 Brava 1.11 and 1.11ck or later models with either a 40mm or 50mm bearing. They utilize a 6-bolt mounting system to provide an extra level of adjust-ability to the chassis.
These bearing cassettes offer adjustable ride heights for dialing in your chassis cross weight to the exact settings you are looking for. They work with both 40mm and 50mm axles with 3 bolt cassette mounting.
These split bearing cassettes are for the use of 40mm or 50mm axle bearings in the older 3 bolt cassette mounting chassis. They are split at the top to provide adjustable tension on the bearing itself.
These 50mm axle bearing provide a tight fit and a smooth roll with as little tension as possible. They come with the set screws to help keep the axle from spinning inside the bearing while on the ground.
This bearing hanger is designed for use on 1.125" or 28mm diameter tubing and for the 40/50mm 3-bolt bearing cassette. It can also be used with the 40/50mm adjustable bearing cassette. This is the standard hanger on the 2002-2010 Brava karts, and the 2011+ Brava 4.2c and Ignite K3.
These are sold individually.
These will need to be welded to the frame.
Keep your components in place and spinning when they are supposed to with these axle keys for the 40mm and 50mm Righetti Axles.
Save weight and earn style points with these magnesium rear wheel hubs designed for use on the 50mm rear axles. Hubs come in two different sizes: 75mm and 95mm for extra tuning options.
Having the right size wheel hub on your kart is key when dialing in your chassis. With three distinct sizes, these beefy wheel hubs look great, and make sure that you are getting every tenth of speed you can.
M8 x 1.25 wheel hub stud for 30mm, 40mm and 50mm wheel hubs
This 50mm magnesium sprocket hub is truly a top of the line piece. Manufactured from magnesium, it is a light-weight hub that can help you shed some rear axle weight, and look really slick in the process.
This sprocket hub made by WildKart is designed for a 50mm axle and 6-hole sprocket configuration. Built durable with a polished black finish.
This brake hub made by WildKart is designed for a 50mm axle and 6-bolt roter configuration.
This brake hub is designed to be used with a 50mm rear axle and a 6 bolt brake rotor. This magnesium hub is lightweight and comes in a matte gold finish.
Bearing cassette mount bolts are a M10 x 1.5, pan head bolt. No conical or flat washers are needed. Comes in a bright blue zinc finish.
- per page
